AET Lezaud Logo
Customised production

Products for
 Frozen food industry

In the frozen food industry, materials and sealing solutions are exposed to permanently low temperatures and changing operating conditions.

Lézaud offers Hoses, Profiles, foils, flat seals and O-rings for various applications in the deep-freeze industry. Cold flexibility, dimensional stability and reliable sealing function, even under demanding conditions, are crucial here.

Drawing on our material expertise in plastics, TPEs, and elastomers, we provide tailored advice on selecting suitable solutions – aligned with the application, temperature range, and technical demands.

Frozen food industry

Applications

Applications
  • Automotive industry (3)
  • Construction industry (3)
  • Chemical industry (5)
  • Electrical engineering (1)
  • Energy industry (1)
  • Healthcare industry (3)
  • Heating & air conditioning technology (5)
  • Insulation technology (7)
  • Cosmetics industry (5)
  • Mechanical & plant engineering (9)

Elastomer base

Elastomer base
  • EPDM (3)
  • Silicone (9)

Material

Material
  • Foam rubber/ foam (3)
  • Solid material (9)

Colour

Colour
  • red (3)
  • black (3)
  • translucent (5)
  • white (1)

Hardness

Hardness
  • 10 to 30 Shore A (3)
  • 40 to 65 Shore A (7)

Density

Density
  • 0.45 +/-0.05 g/cm³ (2)
  • 1.15 g/cm³ (1)
  • 1.18 +/-0.02 g/cm³ (1)
  • 1.2 +/-0.05 g/cm³ (1)
  • 1.2 g/cm ³ (1)
  • 1.2 g/cm² (1)
  • 1.2 g/cm³ (2)
  • 400 +/-50 kg/m³ (1)
  • PTFE: 2.16 g/cm³ (1)
  • PTFE: 2.19 g/cm³ (1)

Conformity

Conformity
  • BfR (7)
  • EAB/DAB (1)
  • EC 1935/2004 (4)
  • FDA (8)
  • USP (1)

Product category

Product category
  • Profiles (5)
  • Sheets (4)
  • Round cords (2)
  • Hoses (1)

Applications

Applications
  • Automotive industry (3)
  • Construction industry (3)
  • Chemical industry (5)
  • Electrical engineering (1)
  • Energy industry (1)
  • Healthcare industry (3)
  • Heating & air conditioning technology (5)
  • Insulation technology (7)
  • Cosmetics industry (5)
  • Mechanical & plant engineering (9)

Elastomer base

Elastomer base
  • EPDM (3)
  • Silicone (9)

Material

Material
  • Foam rubber/ foam (3)
  • Solid material (9)

Colour

Colour
  • red (3)
  • black (3)
  • translucent (5)
  • white (1)

Hardness

Hardness
  • 10 to 30 Shore A (3)
  • 40 to 65 Shore A (7)

Density

Density
  • 0.45 +/-0.05 g/cm³ (2)
  • 1.15 g/cm³ (1)
  • 1.18 +/-0.02 g/cm³ (1)
  • 1.2 +/-0.05 g/cm³ (1)
  • 1.2 g/cm ³ (1)
  • 1.2 g/cm² (1)
  • 1.2 g/cm³ (2)
  • 400 +/-50 kg/m³ (1)
  • PTFE: 2.16 g/cm³ (1)
  • PTFE: 2.19 g/cm³ (1)

Conformity

Conformity
  • BfR (7)
  • EAB/DAB (1)
  • EC 1935/2004 (4)
  • FDA (8)
  • USP (1)
plate lez sil 60tf

Sheet LEZ-SIL 60TF

Silicone plate, suitable for food contact

Material: silicone
Hardness: 60 +/-5 Shore A
Properties: autoclavable, good pressure resistance, good low-temperature flexibility, heat-resistant, peroxide cross-linked, sterilisable
Conformity: BfR XV, EC 1935/2004, FDA 21 CFR §177.2600
Temperature range: -60°C to +230°C
Show product
plate lez silflon

Sheet LEZ-SILFLON

Silicone plate with PTFE film vulcanised on one side

Material: silicone/PTFE
Hardness: PTFE 65 +/-5 Shore D, silicone: 45 +/-5 Shore A
Properties: heat-resistant, with PTFE film vulcanised on one or both sides
Conformity:  FDA 21 CFR §177.2600 (silicone), 2002/72/EC (with the following restriction TFE/SML = 0.05 mg/kg, PTFE), BfR LI 2.1.1.1 (PTFE), BfR XV (silicone), DAB 2014 (8th edition chap. 3.2.9/silicone), EAB 2014 (silicone), EU 10/2011 (with the following restriction TFE/SML -0.05 mg/kg, PTFE), FDA 21 CFR §177.1550 (PTFE)
Temperature range: -60°C to +220°C
Show product
plate lez silflon t

Sheet LEZ-SILFLON T

Silicone plate with PTFE film vulcanised on one side

Material: silicone/PTFE
Hardness: PTFE: >54 Shore D, silicone: 40 +/-5 Shore A
Properties: heat-resistant, with PTFE film vulcanised on one or both sides
Conformity:  FDA 21 CFR §177.2600 (silicone), 2002/72/EC (with restriction TFE/SML - 0.05 mg/kg, PTFE), BfR LI 2.1.1.1 (PTFE), BfR XV (silicone), EU 10/2011 (with restriction TFE/SML - 0.05 mg/kg, PTFE), FDA 21 CFR §177.1550 (PTFE), USP Class VI (PTFE), USP Class VI (silicone)
Temperature range: -60°C to +200°C
Show product
Profile LE P'tit Ephem 60

Profile LEZ-EPEM 60

EPDM profile

Material: EPDM
Hardness: 60 +/-5 Shore A
Properties: impermeable to gas, good low-temperature flexibility, good UV and light resistance, good compression set, ozone-resistant, very good ageing resistance, water-resistant
Temperature range: -35°C to +120°C
Show product
Lez epex profile 15

Profile LEZ-EPEX 15

EPDM sponge rubber profile

Material: EPDM sponge rubber
Hardness: 15 +/-5 Shore A
Properties: fine-pored closed cells, good cold flexibility, good UV and light resistance, good compression set, with skin, ozone-resistant, very good ageing resistance
Temperature range: -35°C to +110°C
Show product
Profil lez epex 15 sk

Profile LEZ-EPEX 15 SK

EPDM sponge rubber profile, self-adhesive on one side

Material: EPDM sponge rubber
Hardness: 15 +/-5 Shore A
Properties: self-adhesive on one side, fine-pored closed cells, good low-temperature flexibility, good UV and light resistance, good compression set, with skin, ozone-resistant, very good ageing resistance
Temperature range: -35°C to +110°C
Show product
After what search You?
Browse our product range by products, materials, industries, applications, dimensions and more.