Sheet LEZ-SIL 60RT/S

Material: FKM with Nomex insert

Hardness: 75+/-5 Shore A

Properties: fabric-reinforced, good compressive strength, excellent compression set at high temperatures, heat-resistant, high abrasion resistance, oil-resistant, ozone-resistant

Temperature range: -15°C to +200°C

Material: silicone/PTFE

Hardness: PTFE: >54 Shore D, silicone: 40 +/-5 Shore A

Properties: heat-resistant, with PTFE film vulcanised on one or both sides

Conformity:  FDA 21 CFR §177.2600 (silicone), 2002/72/EC (with restriction TFE/SML - 0.05 mg/kg, PTFE), BfR LI 2.1.1.1 (PTFE), BfR XV (silicone), EU 10/2011 (with restriction TFE/SML - 0.05 mg/kg, PTFE), FDA 21 CFR §177.1550 (PTFE), USP Class VI (PTFE), USP Class VI (silicone)

Temperature range: -60°C to +200°C

Material: FKM

Hardness: 75+/-5 Shore A

Properties: good compressive strength, excellent compression set at high temperatures, heat-resistant, high abrasion resistance, oil-resistant, ozone-resistant

Conformity: UL94 V0

Temperature range: -10°C to +250°C

Material: FKM/silicone foam

Hardness: FKM: 75 +/-5 Shore A, silicone: 15 +/-5 Shore A

Properties: heat-resistant, insulating, thermal properties

Temperature range: FKM: -20°C to +200°C, silicone: -60°C to +230°C, adhesive tape: -10°C to +180°C

Material: silicone/PTFE

Hardness: PTFE 65 +/-5 Shore D, silicone: 45 +/-5 Shore A

Properties: heat-resistant, with PTFE film vulcanised on one or both sides

Conformity:  FDA 21 CFR §177.2600 (silicone), 2002/72/EC (with the following restriction TFE/SML = 0.05 mg/kg, PTFE), BfR LI 2.1.1.1 (PTFE), BfR XV (silicone), DAB 2014 (8th edition chap. 3.2.9/silicone), EAB 2014 (silicone), EU 10/2011 (with the following restriction TFE/SML -0.05 mg/kg, PTFE), FDA 21 CFR §177.1550 (PTFE)

Temperature range: -60°C to +220°C

Material: FKM

Hardness: 70 +/-5 Shore A

Properties: FKM disc, premium quality

Conformity: UL94 V0

Temperature range: -20°C to +205°C