Sheet LEZ-VIT 75/N

Material: FKM

Hardness: 75+/-5 Shore A

Properties: good compressive strength, excellent compression set at high temperatures, heat-resistant, high abrasion resistance, oil-resistant, ozone-resistant

Conformity: UL94 V0

Temperature range: -10°C to +250°C

Material: PTFE

Hardness: 55 +/-5 Shore D

Properties: dielectric properties, flame-retardant, good non-stick properties, good pressure resistance, heat-resistant, high abrasion resistance, high sliding properties, no water absorption, very good ageing resistance, water-resistant

Conformity: FDA 21 CFR §177.1550, UL94 V0

Temperature range: -200°C to +260°C

Material: butyl IIR/PTFE

Hardness: butyl: 50 +/-5 Shore A, PTFE: 55 +/-5 Shore D

Properties: free from phthalates, with PTFE film vulcanised on one or both sides

Conformity: 2002/72/EC (with the following restriction TFE/SML = 0.05 mg/kg, PTFE), 2002/72/EC and EU 10/2011 (with the following restriction TFE/SML = 0.05 mg/kg, PTFE), BfR LI 2.1.1.1 (PTFE), BfR XXI (butyl), EAB/DAB 2014, 8th edition 3.2.9. type 2 (butyl), EU 10/2011 (with the following restriction TFE/SML -0.05 mg/kg, PTFE), FDA 21 CFR §177.1550 (PTFE), REACH regulation 1907/2006 (butyl)

Temperature range: -40 °C to +140°C

Material: silicone with glass fibre insert

Hardness: 60 +/-5 Shore A

Properties: finely fabric-patterned, fabric-reinforced, good low-temperature flexibility, heat-resistant, peroxide cross-linked, thermal properties

Temperature range: -60°C to +230°C

Material: silicone foam

Hardness: 15 +/-5 Shore A

Properties: good elongation at break, good resilience, heat-resistant, with skin, thermal properties

Conformity: BfR XV, FDA 21 CFR §177.2600

Temperature range: -60°C to +230°C

Hardness: 60 +/-5 Shore A

Properties: good low-temperature flexibility, heat-resistant, insulating, peroxide cross-linked

Conformity: EC 1935/2004

Temperature range: -60°C to +230°C